Computers

Best KVM Switch for Two Computers and Two Monitors

The best dual-monitor KVM switches for two trading computers in 2026, compared on 4K refresh rate, EDID window layout and price from about $200.

By Reid Calder · Published · Updated · 6 min read

We may earn a commission from links on this page, at no extra cost to you. How we pick products

Illustration of two computers under a trading desk sharing one keyboard, one mouse and two chart monitors through a small KVM switch

A lot of traders end up with two computers on one desk: a trading machine and a work laptop, or a fast desktop for charts and an older one for email and research. A KVM switch (keyboard, video, mouse) lets both share the same monitors, keyboard and mouse, and you flip between them with a button or a keyboard shortcut.

The thing that separates a good KVM from an annoying one is what happens to your windows when you switch. Cheaper switches make each computer think its monitors were unplugged, so your charts and order windows pile up on one screen when you switch back. Switches with EDID emulation keep a fake monitor connected to the computer you're not using, so everything stays where you left it.

We picked five switches and checked resolutions, refresh rates and ports on each maker's own pages, with prices from the maker's store and B&H Photo in early November 2026.

Quick picks

KVM switch Monitors Best resolution and refresh Keeps windows in place Approx. price (checked Nov 2026) Best for
TESmart DKS202-M24 2 4K at 144 Hz (with DSC) Yes, EDID emulation about $330 Best overall for two desktops
IOGEAR GCS1942 2 (4 with a second unit) 4K at 60 Hz Not listed about $300 at B&H Best from B&H, simple 4K60 desks
Level1Techs DP 1.4 Dual Monitor KVM 2 4K at 120 Hz No (needs a setting change) from $520 Fussy keyboards and USB gear
ConnectPRO UDP2-12AP 2 (4 with a second unit) 4K at 120 to 144 Hz Yes, full-time EDID emulation about $571 without cables (sold out on ConnectPRO's store on Nov 9) Macs, docks and a four-screen setup
ATEN CS1922 1 4K at 60 Hz Not listed about $199 at B&H One big monitor on a budget

Prices are approximate and change often.

Do you need a KVM at all?

Only if both computers need the same monitors. If each machine can keep its own screens, software is free: Microsoft's PowerToys includes Mouse Without Borders for sharing one keyboard and mouse across Windows PCs, and Apple's Universal Control does the same across Macs and iPads. A KVM is the answer when you have, say, two big chart monitors and want either computer on them.

If one of your computers is a laptop, also look at a Thunderbolt dock. Plugging the laptop into a dock and the desktop straight into the monitors' second inputs is sometimes simpler than a KVM.

1. TESmart DKS202-M24: best overall

The best balance of features and price for two desktops with two DisplayPort monitors. It handles up to 4K at 144 Hz per screen using DSC compression (or 8K at 60 Hz), and its EDID emulation means each computer always thinks its monitors are connected, so your chart layout survives every switch. It also shares USB 3.0 devices and audio, and you can switch with a front button, keyboard hotkeys, the mouse wheel or an IR remote. TESmart includes the cables to both computers.

Two cautions from TESmart's own listing: it has only DisplayPort inputs, no HDMI or USB-C, and for a laptop TESmart recommends a direct USB-C to DisplayPort connection rather than going through a dock. TESmart's store listed it at $329.90.

↑ Back to quick picks

2. IOGEAR GCS1942: best from B&H

A plain, well-supported dual-monitor switch for 4K at 60 Hz, which is all most trading screens need. It switches two DisplayPort computers between two monitors, shares a 2-port USB 3.0 hub and audio, and comes with four DisplayPort cables, two USB 3.0 cables and two audio cable sets. You can switch with front buttons, keyboard hotkeys or the mouse wheel, and IOGEAR says a second unit expands it to four 4K monitors.

It's DisplayPort 1.2, so it tops out at 60 Hz at 4K, and IOGEAR doesn't advertise EDID emulation, so expect to tidy windows after switching unless you change the settings below. B&H had it in stock at $299.99.

↑ Back to quick picks

3. Level1Techs DP 1.4 Dual Monitor KVM: best for fussy keyboards and USB gear

Level1Techs builds its switches for the gear that trips up other KVMs: RGB gaming keyboards, keyboards with their own USB hubs, and USB 3 devices. It handles DisplayPort 1.4 at up to 4K and 120 Hz (or 8K at 30 Hz) per monitor, and you can choose 5 Gb/s USB-B or 10 Gb/s USB-C inputs.

The catch is that it doesn't emulate monitors, and Level1Techs says so plainly: your windows will shuffle when you switch unless you change two settings. On Windows 11, turn on "Remember window locations based on monitor connection" and turn off "Minimize windows when a monitor is disconnected" (Settings, System, Display, Multiple displays). On a Mac, turn off "Automatically rearrange Spaces based on most recent use" in Desktop & Dock. No cables are included, and it starts at $520 from the Level1Techs store.

See it at Level1Techs

↑ Back to quick picks

4. ConnectPRO UDP2-12AP: best for Macs, docks and four screens

The most capable switch here, and the most expensive. ConnectPRO uses full-time EDID emulation so nothing moves when you switch, supports 4K at 120 Hz with certified DisplayPort 1.4 cables (higher with fiber or DisplayPort 2.1 cables), and lists support for Apple silicon Macs and laptops connected through Thunderbolt 4 docks. You can stack two units to run four DisplayPort monitors from one keyboard and mouse, which suits a four-chart desk. It carries a 3-year warranty.

ConnectPRO notes its fast USB switching isn't fully compatible with QMK custom keyboards. ConnectPRO listed the switch alone at $570.90, or $629.90 with its standard cable kit ($709.90 with the premium kit), but its store page showed the switch as sold out when we rechecked on November 9, 2026. If you can't wait for a restock, the Level1Techs switch above also does 4K at 120 Hz (without monitor emulation), and the IOGEAR is the in-stock B&H option at 4K 60 Hz.

See it at ConnectPRO

↑ Back to quick picks

5. ATEN CS1922: best budget pick for one big monitor

If both computers share one large monitor, such as a 40-inch ultrawide or a 4K screen split into chart panes, you don't need a dual-monitor KVM. The ATEN CS1922 switches one DisplayPort monitor at up to 4K 60 Hz, shares a 2-port USB 3.0 hub and audio, and can switch the keyboard and mouse separately from USB devices. ATEN also lists Mac keyboard support and an option to skip to whichever computer is powered on.

It's a single-monitor switch, so it's the wrong pick for a two-screen desk. B&H had it in stock at $199.00.

↑ Back to quick picks

What to buy

  • Two desktops, two DisplayPort monitors, high refresh: TESmart DKS202-M24.
  • Two computers, two 4K 60 Hz monitors, simplest setup: IOGEAR GCS1942.
  • Gaming keyboard or lots of USB 3 gear: Level1Techs, with the window settings changed.
  • Mac or laptop on a Thunderbolt dock, or four monitors: ConnectPRO UDP2-12AP.
  • One big shared monitor: ATEN CS1922.

Not sure how many screens you need? Start with our monitor-count guide, then pick the monitors. If you're deciding which computer runs your platform, see Mac vs PC for day trading and our trading computer guide.

FAQ

Will my windows move when I switch computers? On a KVM without EDID emulation, usually yes, because each computer sees its monitors disconnect. The TESmart and ConnectPRO switches emulate the monitors to prevent that. On other switches, the Windows 11 and macOS settings in the Level1Techs section help.

Does a KVM add input lag? The video passes straight through, so charts look the same. Keyboard and mouse handling varies by switch, and Level1Techs and ConnectPRO both build specifically for low-lag, wide-compatibility USB.

Can I use a KVM with a laptop? Yes, with a USB-C to DisplayPort cable or a dock. TESmart recommends a direct USB-C to DisplayPort connection for its DisplayPort-only model, and ConnectPRO lists support for laptops on Thunderbolt 4 docks.

What cables do I need? Two video cables and one USB cable per computer for a dual-monitor switch, plus a video cable to each monitor. TESmart and IOGEAR include the computer-side cables; Level1Techs includes none and recommends DisplayPort cables no longer than 4 meters.